HALO is recess ceiling mounted and requires a 120mm hole in a ceiling panel or sheet rock.
Coverage Area: The Vape Detector and Chemical Sensors are specified for a 12×12 room. Larger rooms/areas will require multiple HALO devices. Measuring for the aggression and gunshot detection ranges is still being tested.
HALO IOT Smart Sensor Mechanical Specifications
Operating Temperature -- 32°F - 122°F (0°C - 50°C)
Operating Humidity -- 0 to 90% Relative Humidity (non-condensing)
Power Supply -- PoE (IEEE 802.3af Class 3 Compliance) 9W
Dimensions -- 5.75" x 3.08" (146mm x 78mm)
Weight -- 0.8 lbs ( 0.365 kgs)
Mounting Options -- Ceiling Flush Mount, Surface Mount (optional)
Vandal -- Vandal proof housing with Tamper Alert
Interface Specifications
Live Image Resolution* -- 1024 x 768
Video Compression* -- MJPEG
Audio -- MEMS Microphones (2) [Audio Analysis Only] No Recording of Live Stream
Relays Outputs -- 2, Normally Open or Closed, 48VDC at 1 amp
VMS Integrations -- Milestone, Panasonic, Axxonsoft
Status Light -- Alarm Condition, Error, Sensor Life
Speaker
Alarm Condition, Pre-Recorded Files, Programmable
*Image display of sensor readings only.
Ethernet -- RJ-45 (10/100 Base-T)
Alarm Triggers -- Particulates, Carbon Dioxide Equivalents, Total Volatile Organic Compounds, Carbon Monoxide, Ammonia, Temperature/Humidity, Light Level, Sound Levels, Tamper, Vape, Vape THC, Aggression
Protocols -- TCP/IP, UDP, IPv4/v6, HTTP, HTTPS, RTP, RTSP, DHCP, ARP, Bonjour
Maximum Users Connections -- Live MJPEG Stream, 8 Users